RE: SDL-News: Gates and Block Substructure (fwd)


Subject: RE: SDL-News: Gates and Block Substructure (fwd)
From: Jose María Parra Sageras (jospar#rest.tel.uva.es)
Date: Wed Nov 16 2005 - 19:38:46 GMT


---------- Forwarded message ----------
Date: Wed, 16 Nov 2005 09:03:02 -0500
From: Erik Mats <Erik.Mats#telelogic.com>
To: Jose María Parra Sageras <jospar#rest.tel.uva.es>
Subject: RE: SDL-news: Gates and Block Substructure (fwd)

Hi Jose María,

If you happen to be using Telelogic TAU, it might help to know that when you create a new Block you're presented with a dialog that lets you select whether the new block should contain blocks or processes.

The choice is "Process interaction page" vs "Block interaction page".

Best regards
/Erik

-----Original Message-----
From: owner-sdlnews#sdl-forum.org [mailto:owner-sdlnews#sdl-forum.org] On Behalf Of Andreas Prinz
Sent: Wednesday, November 16, 2005 3:13 AM
To: Jose María Parra Sageras
Cc: sdlnews#sdl-forum.org; Manuel Rodriguez Cayetano
Subject: Re: SDL-news: Gates and Block Substructure (fwd)

Become an SDL Forum Society member <http://www.sdl-forum.org/Society/members.htm>
The originator of this message is responsible for its content.
-----From Andreas Prinz <andreas.prinz#hia.no> to sdlnews -----

Dear Jose María Parra Sageras,
you wrote:
> I see what you mean but taking into account my specs, I need to define a
> group of blocks inside a block. I use a block substructure as a way to
> achieve this. So I cannot specify anything at the top-level version of
> the block type because it is not permmited defining a block in the upper
> level block (in SDL-96). I have considered other implementations but
> there is no way for them. I need at least three blocks defined inside a
> block.

That sounds strange to me. As far as I know, blocks could be put into
blocks since SDL'88. I have also checked with Cinderella, which allows
this for SDL'96 and SDL'92. See also the reply by Laurent Doldi.

So the language does allow putting blocks graphically into block types.
Now it is really important to know which tool you are using in order to
find a way around your problem.

Best regards,
     Andreas Prinz

-- 
Andreas Prinz
--End text from Andreas Prinz <andreas.prinz#hia.no> to sdlnews ---
For extra SDL Forum Society benefits join at <http://www.sdl-forum.org/Society/members.htm>
     help

--End text from =?ISO-8859-1?Q?Jose_Mar=EDa_Parra_Sageras?= <jospar#rest.tel.uva.es> to sdlnews --- For extra SDL Forum Society benefits join at <http://www.sdl-forum.org/Society/members.htm>



This archive was generated by hypermail 2a23 : Thu May 09 2013 - 16:05:50 GMT